Mobile ODIN description :
Mobile ODIN is one of the most
professional apps on device firmware flasher. All you need to do is put the
firmware files on your internal or external memory , start Mobile ODIN and
start flashing .
Root is required to be able to use
Mobile ODIN app.
If you use the EverRoot option,
Mobile ODIN will Root the firmware while you flash it, so if you want to check
out the new leaked firmware, you will have no reason to lose root .
Currently supported devices :
Galaxy S:
- GT-I9000/B/M
- GT-I9003/L
- AT&T/Rogers Captivate
SGH-I896/I897
Galaxy S2:
- GT-I9100/T/G/M
- SHW-M250S/K
- SC-02C
- AT&T SGH-I777
- Sprint/Virgin/Boost Epic 4G
Touch SPH-D710/VMUB/BST
- USCC SCH-R760
Galaxy S3:
- GT-I9300/T
- GT-I9308
- LTE SHV-E210S
- LTE GT-I9305/T/N
- AT&T/Canadia SGH-I747/M
- TMOUS SGH-T999
- Sprint/C-Spire SPH/SCH-L710
- VZW SCH-I535 (unlock bootloader
!)
- USCC/Cricket/MetroPCS Galaxy S3
SCH-R530/U/M/C
Galaxy S4:
- LTE GT-I9505
- Sprint SPH-L720
- TMOUS SGH-M919
- USCC SCH-R970
- Canadia SGH-I337M
Galaxy S5:
- LTE SM-G900F
- Oceania SM-G900I
- Korea SM-G900L
- Americas SM-G900M
- Sprint SM-G900P
- USCC SM-G900R4
- TMOUS SM-G900T
- Metro SM-G900T1
- Canadia SM-G900W8
Google Galaxy Nexus:
- GSM Maguro/Yakju/GT-I9250
- CDMA/LTE Toro/Mysid/SCH-I515 (no
cdma radio flashing)
Galaxy Note:
- GT-N7000/B
- GT-I9220
Galaxy Note 2:
- GT-N7100
- LTE GT-N7105
- AT&T/Canadia SGH-I317/M
- TMOUS SGH-T889
- Sprint SPH-L900
- VZW SCH-I605 (unlock bootloader
!)
- USCC SCH-R950
Galaxy Note 3:
- SM-N9005
- Sprint SM-N900P
- TMOUS SM-N900T
- USCC SM-N900R4
- Canadia SM-N900W8
Galaxy Note 8.0":
- 3G GT-N5100
- Wi-Fi GT-N5110/N5113
- LTE GT-N5120
Galaxy Note 10.1":
- 3G GT-N8000
- Wi-Fi GT-N8010/N8013
- LTE GT-N8020
Galaxy Tab:
- Tab 7" GT-P1000
- Tab 7.0 Plus GT-P6200/L,
GT-P6210
- Tab 7.7" GT-P6800, GT-P6810
- Tab 10.1" GT-P7500,
GT-P7510
- Tab 2 7" GT-P3100,
GT-P3110, GT-P3113
- Tab 2 10" GT-P5100,
GT-P5110, GT-P5113
Galaxy 5:
- GT-I5500/B/L/T/M
- GT-I5503/T
- GT-I5508
Don't worry about increasing your
custom kernel flash or make the yellow warning triangle when you flashing with
Mobile ODIN because it will not make that .
Mobile ODIN Manual :
Flashing with Mobile ODIN is easy.
You can start by starting the app and the app will check your system has
everything it needs to continue (like root) or not. It may need to download an
additional package, so it is advised you have Wi-Fi available to make sure the
app have the ability to download the needed packages.
Now you should see the main Mobile
ODIN screen. It will list a set of partitions. Clicking a partition will allow
you to select a file from your SD card to flash to that partition. Do not worry
about selecting the wrong file because Mobile ODIN will not let you. Separate
files (named after the partition) as well as .tar and .tar.md5 files are
supported.
From the desktop ODIN you may be
used to "PDA", "PHONE", and "CSC" buttons. All three
of these buttons have been replaced by the "Open file ..." button.
This button will open the file you select from the SD card, and find all the
partitions it can flash inside that file. So if you select a .tar file
containing kernel and modem, the Kernel and Modem partitions will be set up to
use that .tar file for flashing.
Now that we have selected what we
want to flash, if you have the Pro version you can proceed to the EverRoot
section. The EverRoot options allows you to root your firmware while it is
being flashed. Never again will you be without root! Select here which apps you
want to inject in the firmware that is being flashed.
Now that we are all done selecting
partitions and configuring EverRoot, we continue to "Flash firmware".
Mobile ODIN will gather all the information it needs and perform the flash.
Before starting, however, it will check that your battery level is over 50%,
and if applicable offer to verify MD5 checksums on the files you have selected
to flash. If all is well, it will reboot into recovery mode, and flash the
firmware you have selected.
Mobile ODIN screenshots :
Download Mobile ODIN Pro
Download Mobile ODIN Free